IV2-G30F

SKU

$591.55

Short Description

Sensor amplifier Learning/standard mode

For more information click here

For more information click here

describe

ModelIV2-G30F
TypeLearning/standard type
ToolsAvailable modesLearning mode / Standard mode
Standard mode built-in toolsOutline, Colour area*1, Area*2, Edge pixels, Colour average*1, Brightness average*2, Width, Diameter, Edge presence,
Pitch, OCR, Colour/brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge)
Number of toolsDetection tools: 16 tools, position adjustment tool: 1 tool*3
Switch settings (programs)128 programs (when using SD card) / 32 programs (when not using SD card)
IndicatorsPWR/ERR, OUT, TRIG, STATUS, LINK/ACT, SD
Image historyNumber of storable images1000 images *4
Save conditionsSelectable between NG only, NG and OK near threshold*5, and All*4
Image data transferTransfer destinationSelectable between SD card and FTP server
Transfer formatSelectable between bmp, jpeg, iv2p, and txt
Transfer conditionsSelectable between NG only, NG and OK near threshold*5, and All
Analysis informationRUN displayTools list (Judgement results, degree of similarity, or degree of similarity bar display)*6
RUN informationSwitchable between OFF, histogram, processing time, count, and output monitor
Histograms: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs
Processing time: Processing time (latest, Max., Min., Ave.), Image capture interval (latest, Max., Min., Ave.)
Count: Trigger numbers, Number of OKs, Number of NGs, Trigger errors, Strobe errors
Output monitor: ON/OFF status by output *6
Other functionsImage capture functionImage buffer, Image capture range, Digital zoom (2×, 4×), HDR, High gain, Colour filter*1, White balance*1, Brightness correction
Tool functionsLearning mode: Additional learning
Standard mode: Mask outline, Masking function, Colour extraction/exclusion*1, Colour histogram function*1,Monochrome histogram function*2, Scaling function
UtilitiesFailing sensor list, Failure hold, Test run, I/O monitor, Security settings, Simulator*7
InputTypeSwitchable between non-voltage input and voltage input
For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)
For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)
Number of inputs8 (IN1 to IN8)
FunctionIN1: External trigger, IN2 to IN8: Enable by assigning optional functions
Assignable functions: Program switching, Clear error, External master image registration, SD card save cancel
OutputTypeOpen collector output; NPN/PNP switchable, N.O./N.C. switchable
For open collector NPN output: Maximum rating of 26.4 V, 50 mA, residual voltage of 1.5 V or less
For open collector PNP output: Maximum rating of 26.4 V, 50 mA, residual voltage of 2 V or less
Number of outputs8 (OUT1 to OUT8)
FunctionEnable by assigning optional functions
Assignable functions: Total judgement (OK/NG), Run, Busy, Ready, Strobe, Position adjustment result, Judgement result of each tool,
Result of the logical operation of each tool, Error, SD card error
EthernetStandard100BASE-TX/10BASE-T
ConnectorRJ45 8-pin connector
Network functionFTP client, SNTP client
Interface compatibilityBuilt-in EthernetEtherNet/IP™, PROFINET, TCP/IP non-procedure communication
Communication unitEtherCAT, CC-Link, DeviceNet, PROFIBUS, RS-232C*8
Expanded memorySD card (SD/SDHC)*9
RatingPower voltage24 VDC ±10% (including ripple)
Current consumption1.8 A or less (including communication unit and output load)
Environmental resistanceAmbient temperature0 to +50°C (No freezing)
Relative humidity35 to 85% RH (No condensation)
MaterialMain unit case: PC, Power connector: PA/POM, I/O connector: PA, Sensor head connector: Zinc + Ni plating/PA,
Ethernet connector: Copper alloy + Ni plating, Main unit rear heat sink: Aluminium, Main unit rear DIN rail fixing tab: POM, Nameplate: PC
WeightApprox. 330 g